Electronics Automation

A range of miniature bayonet locking connectors from Deutsch address issues of weight and space while providing high levels of performance in harsh environments.
Now available from Aerco is a range of miniature bayonet locking connectors from Deutsch designed to address the key issues of weight and space while providing high levels of performance in harsh environments. Deutsch Micro Military Connector (MMC) connectors are based on the proven environmental and mechanical performance of MIL-DTL-38999 but with the added benefit of increased contact density in a more compact design making them ideal for applications where space is at a premium and reliability is critical. Available in three-, five- and nine-contact options with PCB variants also available, these tough, lightweight connectors will be ideal for use in combat vehicles and both military and commercial aircraft.

The connectors are sealed to IP67 and have an operating temperature of -55 to +175C.

Mechanical endurance is a minimum of 500 mating cycles and several plating finishes are available including RoHS compliant nickel plating.

Applying a shrink boot is made easier as the connector design incorporates an integral mounting that does not require additional parts.

Amphenol's TVRB range of CECC75201-002 approved marine aluminium-bronze circular connectors are now available with a 48-hour assembly service.
PEI-Genesis, the international distributor of commercial, industrial and military connectors, has added Amphenol's TVRB range of CECC75201-002 approved marine aluminium-bronze circular connectors to its stock profile and is now offering them with an unrivalled 48-hour assembly service. Representing a dramatic cut in the industry's typical lead times of several weeks for this type of product, the rapid assembly service has been made possible by PEI-Genesis's strategy of carrying large stocks of piece parts and using special in-house developed robotic assembly machines. The TVRB connectors feature tough nickel-aluminium-bronze shells and offer a high degree of corrosion resistance, making them particularly suitable for use in the salt-water environment of naval and commercial-marine applications, as well as other harsh industrial conditions.

Derived from the MIL-DTL-38999 Series III specification, the connectors are completely intermateable and interchangeable with other Series III products.

The range includes 50 different insert planforms, covering nine standard shell sises, five contact sizes and a wide variety of high-density contact arrangements accommodating up to 128 contacts.

All TVRB connectors use a quick-release triple-start coarse-ribbed threaded coupling nut and incorporate both an antivibration mechanism and 100% scoop-proof contact protection.

Binder 440 Series miniature plastic circular connectors meet the growing demand for a low-cost push-pull circular connector with IP67 protection.
Quadrant is now stocking the Binder 440 Series miniature, plastic, circular connectors introduced to meet the growing demand for a low cost, push-pull, circular connector with IP67 protection. The Binder 440 comprises five easy to assemble piece-parts and the simple, uncomplicated design and highly effective push-pull locking mechanism offers considerable cost benefits over traditional metal, push-pull connectors. Cable connectors are manufactured from tough, black polyamide with a nickel-plated sleeve and a PBT insert and the flange depth of only 2mm allows for almost flush mounting.

Excellent EMC protection is provided in both cable and chassis connectors and unshielded versions to IP67 and IP40 are also available.

Gold plated solder contacts allow for more than 1000 mating cycles.

The Binder 440 accommodates cables up to 8mm in diameter and is supplied in 3, 4, 5, 6, 7, 8,12 and 19 pin configurations in standard format and 3, 6 and 8 in DIN format.

They are ideal for applications such as test equipment, instrumentation and medical equipment.

Labfacility offers a range of polarised, high quality printed circuit board (PCB) mounting miniature sockets for interfacing with thermocouple and RTD sensors.
Labfacility offers a range of polarised, high quality printed circuit board (PCB) mounting miniature sockets for interfacing with thermocouple and RTD sensors. The mechanical configuration presents solid solder pins through the board for flow soldering compatibility. Although copper pins are usually specified, thermocouple versions K and T are also available with IEC584 colour coded bodies.

Convenient provision is made for a cold junction compensating temperature sensor for use in thermocouple measuring instruments.

The housings are moulded in glass filled polyester to withstand a continuous temperature of 220C.

Manufactured by Labfacility in Europe's largest connector plant under strict ISO9001 disciplines, the miniature sockets are available in quantity from stock.

They are all fully DIN specification compliant for compatibility with other makes of equivalent connectors.

Anglia has signed a UK and Ireland distribution agreement with connector and electromechanical components manufacturer Bulgin.
Anglia has signed a UK and Ireland distribution agreement with connector and electromechanical components manufacturer Bulgin. The Bulgin product range includes IP68 Buccaneer waterproof connectors, IEC connectors and cord sets, Polysnap mains inlet modules, as well as a range of battery and fuse holders, EMI filters, indicators and vandal resistant security switches. 'The name Bulgin is synonymous with high performance connectors for use in challenging environments, and we expect it to be a great asset to us to be able to include these world-class components in our product offering', said Anglia's Sales Director Jim Ward.

Commented John Jonas, Distribution Sales Manager for Bulgin: 'Anglia has particularly impressed us with their strong design-in capabilities, along with their excellent reputation for customer service'.

'The way in which they balance their portfolio - to offer complementary rather than competing products - is also very appealing to us'.

New J-Tek hood kits let customers make their own robust cable assemblies based on Datamate high-reliability connectors.
New J-Tek hood kits from Portsmouth-based interconnect maker Harwin let customers make their own robust cable assemblies based on Datamate high-reliability connectors. Employing a hermaphroditic design, the kits help minimise cost and inventory. The kit comprises a J-Tek Datamate connector with jackscrews prefitted and a hermaphroditic-style hood.

Separate screws are provided for joining both halves of the hood.

The resultant solution is very strong and ergonomic.

It also eliminates the conventional requirement for a special over-moulding on the cable assembly.

Available in 6-, 8-, 10-, 12-, 14-, 20-, 26-, 34-, 42- and 50-way versions, Harwin's J-Tek hood kits can be used in any cable-to-board or cable-to-cable assembly requiring J-Tek Datamate connectors.

They are suitable for industrial, military, aerospace and medical applications.

Novel connectors are designed for quick release of wearable electronic equipment such as headsets, helmets, personal role radios and weapon systems.
Fischer Connectors has developed a novel connector designed for quick release of wearable electronic equipment such as headsets, helmets, personal role radios and weapon systems. The critical feature of the KSE-SSC connector is Fischer Connectors' patented Clic-Loc emergency breakaway system, which allows snatch release of wearable equipment. Shell sizes 102, 103, 1031, 104 and 105 (ie socket diameters 10 to 19mm) correspond with pull-off forces from 16 to 60N.

Fully sealed to IP68 when mated, the KSE-SSC is ideal for applications in defence including Future Soldier Technology and military simulation and training systems, emergency services, and other areas where the wearer may need to quickly shed a piece of equipment.

A unique tactile keying mechanism complements orientation marks and allows the connector to be safely mated in conditions of limited visibility.

Keyway alternatives safeguard against mating the wrong connectors.

Configurations for the KSE-SSC connector range from a single way (coaxial) for radios, GPS antennas etc, to up to 27 ways for control and signalling applications.

A heat-shrink cable sleeve is fitted as standard, but the KSE-SSC can also be supplied as a complete, tested assembly with overmoulded strain relief boot and sealing caps.

When in place, the sealing caps provide protection to IP68.

The connector comes in matt black chrome and silver chrome plated variants.

The KSE-SSC can be retrofitted to equipment which currently has a hardwired link to the user, with enhanced safety and practicality.

Now available from Aerco is the S820, a newly designed, snap-action switch from Schaltbau that has many advantages over its predecessor, the popular S800 series.
Now available from Aerco is the S820, a newly designed, snap-action switch from Schaltbau that has many advantages over its predecessor, the popular S800 series. Built with an improved, stronger mechanism and a more rugged construction that increases its resistance to shock and vibration, the S820 has a current carrying capacity of 20A, twice that of the S800. The new design also takes the opportunity to isolate the normally open and normally closed contact sets, thus separating the circuits and eliminating the risk of flashover.

Built in a transparent case that makes the contact condition evident at all times, the forced contact mechanism guarantees a failsafe operation of the normally closed contact set in the event of overload or spring failure.

Labfacility offers a range of polarised, high quality printed circuit board (PCB) mounting miniature sockets for interfacing with thermocouple and RTD sensors.
Labfacility offers a range of polarised, high quality printed circuit board (PCB) mounting miniature sockets for interfacing with thermocouple and RTD sensors. The mechanical configuration presents solid solder pins through the board for flow soldering compatibility. Although copper pins are usually specified, thermocouple versions K and T are also available with IEC584 colour coded bodies.

Convenient provision is made for a cold junction compensating temperature sensor for use in thermocouple measuring instruments.

The housings are moulded in glass filled polyester to withstand a continuous temperature of 220C.

Manufactured by Labfacility in Europe's largest connector plant under strict ISO9001 disciplines, the miniature sockets are available in quantity from stock.

They are all fully DIN specification compliant for compatibility with other makes of equivalent connectors.

Anglia has signed a UK and Ireland distribution agreement with connector and electromechanical components manufacturer Bulgin.
Anglia has signed a UK and Ireland distribution agreement with connector and electromechanical components manufacturer Bulgin. The Bulgin product range includes IP68 Buccaneer waterproof connectors, IEC connectors and cord sets, Polysnap mains inlet modules, as well as a range of battery and fuse holders, EMI filters, indicators and vandal resistant security switches. 'The name Bulgin is synonymous with high performance connectors for use in challenging environments, and we expect it to be a great asset to us to be able to include these world-class components in our product offering', said Anglia's Sales Director Jim Ward.

Commented John Jonas, Distribution Sales Manager for Bulgin: 'Anglia has particularly impressed us with their strong design-in capabilities, along with their excellent reputation for customer service'.

'The way in which they balance their portfolio - to offer complementary rather than competing products - is also very appealing to us'.

New J-Tek hood kits let customers make their own robust cable assemblies based on Datamate high-reliability connectors.
New J-Tek hood kits from Portsmouth-based interconnect maker Harwin let customers make their own robust cable assemblies based on Datamate high-reliability connectors. Employing a hermaphroditic design, the kits help minimise cost and inventory. The kit comprises a J-Tek Datamate connector with jackscrews prefitted and a hermaphroditic-style hood.

Separate screws are provided for joining both halves of the hood.

The resultant solution is very strong and ergonomic.

It also eliminates the conventional requirement for a special over-moulding on the cable assembly.

Available in 6-, 8-, 10-, 12-, 14-, 20-, 26-, 34-, 42- and 50-way versions, Harwin's J-Tek hood kits can be used in any cable-to-board or cable-to-cable assembly requiring J-Tek Datamate connectors.

They are suitable for industrial, military, aerospace and medical applications.

A comprehensive family of power products caters for all levels of power demand in server enclosures.
Increased power densities, particularly in server enclosures, have placed increasing emphasis on bringing power into the rack in an efficient way, monitoring and controlling the power input and generally managing the power distribution within the enclosure. APW Enclosure Solutions has introduced a comprehensive family of power products to cater for all levels of power demand. The standard power strips have been upgraded; they are now available in 13, 16 and 32A versions.

Modular ipower intelligent power strips, which feature RS232 remote control and monitoring, local LED or LCD display and optional network integration, are scalable up to 30 outlets.

Applications with high numbers of individual servers installed in the rack can be powered using high density strips, which offer up to 48 individual outputs, have branch circuit overload protection and local monitoring, are available in single and three phase versions and can have single or dual feeds.

Sequential switching reduces the initial inrush currents on start-up and enables individual sockets to be remotely switched.

The 1U 19in high power distribution unit provides a single 32 or 63A power connection with the ability to feed up to 96 individual units.

To manage and monitor the power distribution over the network, the Netcom unit, which supports SNMP, telnet and web, monitors two ipower strips - up to 60 individual outlets - for total current, voltage and power.

To provide additional security, circuit protection strips, fitted with fuses, MCBs or RCBs are available in a variety of sizes and configurations.

RIA's new AST125 and AST188 are the latest additions to the SpringCon family of terminal blocks.
RIA's new AST125 and AST188 are the latest additions to the SpringCon family of terminal blocks. Fulfilling the three essentials of today's field wiring applications - fast installation, reliable connection and compact design - these new terminal blocks feature high density dual inline terminations with two vertical wire connections for each pole. Quick installation is achieved by wire ready contacts allowing solid wires, as well as stranded wires with ferrules, to be inserted directly without any lever actuation.

Having two independent connections per pole allows one wire to be relocated while the second is kept under constant pressure in a gas-tight and vibration-resistant connection.

A test port for each pole permits easy verification of the circuit.

Available with 2 to 24 poles, the design of double solder pins for each pole provides a stable mounting on the PCB and wire acceptance is either vertically oriented or at 60 degrees.

The full range includes the standard metric and imperial pitches of 5.0, 5.08, 7.50 and 7.62mm.

The UL rating for AST125 is 300V AC, 15A with 28-12 AWG cable, on a 5.0mm pitch and the AST188 rated at 600V AC, 15A with 28-12 AWG cable, on a 7.62mm pitch.

The PowerModHP (high power) 'B' series connector family features touch-safe female housings, integral positive latches and cable strain relief.
Available now from Anderson Power Products (APP), the PowerModHP (high power) 'B' series connector family features touch-safe female housings, integral positive latches and cable strain relief. These safety features, combined with the ease of connector assembly, establish a new standard for cost effective high power connectors. APP's PowerMod HP 'B' Series connector is rated over 350A for appropriate applications and to 250A at a 30C temperature rise.

The product accommodates American wire sizes from 1/0 to 4/0 AWG and metric wires from 50 to 95mm2.

These connectors use APP's patented Sterling contact technology that offers low electrical resistance, provides a minimum of 500 mating cycles and is rated for circuit interruption (true hot-plug).

The unique latching system, with distinct blue buttons for clear identification, offers superior security and ergonomics.

These connectors are IP20 rated (touch safe) for user safety, and the integral coding key provides further protection by allowing the user to configure unique mating of up to six individual connectors.

An innovative cable strain relief kit, which encompasses all applicable wire sizes, is available as a product option for additional reliability.

PowerMod HP is offered in ten different connector housing types, including right angle, busbar, panel mount and blindmate/float selections, delivering broad design flexibility for current and future high power interconnections.

Schurter has presented its US National Distributor of the Year Award for 2005 to Avnet IP and E.
Schurter has presented its US National Distributor of the Year Award for 2005 to Avnet IP and E. Avnet, headquartered in Phoenix, Arizona, is one of Schurter's key distributor partners, having shown double-digit growth in North American sales in the last four consecutive years. 'Avnet's growth and success with the Schurter lines of fuses, fuseholders, circuit breakers, power entry modules and EMC filter products can be attributed to its focus on developing new markets and the presentation of key OEM accounts', said Bob Barnes, Sales Manager East for Schurter.

'Avnet IP and E has bucked the trend and maintained double-digit growth in the past four years with the Schurter line of diverse products'.

'It's great to get this award for the second year in a row', said Pat Wastal, Senior Vice President of IP and E for Avnet Electronics Marketing.

'Schurter has been recognised as an innovator and industry leader for filter and circuit protection products'.

'Excellent sales support and service has typified our relationship and lead to outstanding sales performance over the past year'.

'Together we will continue to offer customers innovative and efficient filter and circuit protection solutions'.

'Avnet is honoured to once again accept Schurter's Distributor of the Year Award for outstanding performance', added Phil Gallagher, President, Avnet Electronics Marketing Americas.

'Schurter's dedication to developing, manufacturing and marketing interconnect, passive, and electromechanical components - in addition to its extensive product portfolio, continues to represent an unsurpassed collection of product that helps Avnet create a very comprehensive set of service solutions and products for our customers'.

'We look forward to continuing our partnership with Schurter well into the future'.

Avnet IP and E carries the full line of Schurter products, including, power entry modules, EMI/RFI filters, circuit breakers, fuses and fuseholders, in addition to the largest line of vandal resistant switch products.

UL and VDE approved screwless terminal blocks can now be supplied boxed in 36-way bundles complete with 10 end plates enabling users to create banks of terminals to meet their custom requirements.
UL and VDE approved screwless terminal blocks from Camden Electronics can now be supplied boxed in 36-way bundles complete with 10 end plates enabling users to create banks of terminals to meet their custom requirements. Offering maximum convenience, Camden's CSTBV series boxed bundle is available in 5 and 5.08mm pitch versions and users can simply divide the 36-way stacks into desired lengths, adding end-plates where required. For volume orders, Camden also offers a full customisation service, pre-assembling blocks to individual requirements from single-pole units, spacers and end-plates.

Moulded in grey UL94V0 flame retardant PA66, the CSTBV terminal blocks feature guided pin alignment, anti-solder wicking and stainless steel springs.

Specifications include 0.3 to 1.5mm2 cable entry, rating of 12A/250V, dielectric strength of at least 2.5kV/60s, insulation resistance of 5Mohm and working temperature from -20 to +125C (160C for short periods).

Versatile Power Drawer connectors are used on N+1 power supply and rectifier systems for server, telecommunications and network applications.
Anderson Power Products (APP) has added the Power Drawer series of connectors to its high quality connector range. The family features blind mating connectors for 35 or 75A applications. These versatile Power Drawer connectors are used on N+1 power supply and rectifier systems for server, telecommunications and network applications.

APP's durable connectors are UL recognised and are able to mate with competitive products, offering the designer and user further development and sourcing options.

APP's 35A Power Drawer connectors can be configured with up to eight 12AWG power contacts, eight 16AWG power contacts or a combination of four 16AWG power contacts, four 12AWG power contacts and twenty-one 20AWG signal contacts.

APP's 75A Power Drawer connectors can be configured with up to four 8AWG power contacts, nine 12AWG power contacts and twenty four 20AWG signal contacts.

Float mount and printed circuit board mount versions are available for both connectors.

Pin and socket contacts are available for both connectors with crimp, solder cup or printed circuit board termination.

In addition, the connector's pin contacts can be specified for first-mate and last-mate connection, allowing the electronic system to be grounded and mating electronically verified before the power circuits are energised.

Anderson Power Products is also offering 'true hot plug' contacts to accompany its Power Drawer connector family.

The 12AWG contacts are rated for disconnect interruption up to 25A.

These 'hot plug' contacts are available for both the 35 and 75A Power Drawer connector families.

Designed to correct misalignment during blind mating, APP's Power Drawer connectors feature integral guide pins, with an optional floating mount used to reduce fatigue stress on the connector during blind mating.

Camden Electronics, the UK's leading manufacturer and supplier of PCB terminal blocks has a new shareholding management team, led by Managing Director Nicola Kay.
Camden Electronics, the UK's leading manufacturer and supplier of PCB terminal blocks has a new shareholding management team, led by Managing Director Nicola Kay. Along with Ian Alexander as Sales Director and Ryan Wilkinson as Financial Director, Camden now has a very experienced directorial team supported by Martin Reader as Operations Manager and Caroline McKeggie as Purchasing and Quality Manager. Kay intends to capitalise on the potential of the Camden brand by furthering the development of worldwide markets for the company's interconnection and enclosure products.

She commented: 'Camden is a well known and well established brand with a significant share of the UK market for PCB terminal blocks'.

'There is huge potential for increasing market penetration of these and our other product lines on an international basis through the development of a worldwide OEM and distribution customer base'.

'Exports already represent around 30% of our turnover but I believe we can increase this significantly in a relatively short space of time'.

She added: 'Camden's new senior management team will be strengthening alliances with our suppliers and distributors to reinvigorate the business and provide even better service for customers'.

'Our strategy includes expansion of the field sales team, capitalising on our extensive market knowledge, and provision of enhanced technical support and engineering services'.

Kay brings 25 years experience to the Camden team in both component distribution and custom electronic manufacturing (CEM).

She previously founded a highly profitable and award winning CEM.

Working with Kay is Wilkinson, a qualified chartered accountant, who was a lead advisor to the shareholders prior to joining as Financial Director and brings with him 11 years in industrial corporate finance.

Alexander has spent 35 years in the electronics industry with extensive engineering and technical experience.

For 15 years he has spearheaded sales at Camden, being a key player in all the new product developments.

Reader joined Camden in 1999 and has 15 years experience in warehouse management including retail logistics management.

He provides a high level of commercial awareness to the Camden warehouse team.

McKeggie has a proven track record in purchasing and quality management having joined Camden in 1991 originally as quality consultant.

Her responsibilities are to ensure Camden's quality system continues to meet the requirements of BS EN ISO9001:2000 and to ensure that stocks are maintained at optimum levels.

High quality fuseholders from Belling Lee provide cost-effective circuit protection for commercial applications up to 30A at 600V AC.
Now in stock at Aerco is a new range of high quality fuseholders from Belling Lee designed to provide cost-effective circuit protection for commercial applications up to 30A at 600V AC. A number of mounting styles and sizes are available to accommodate fuses in size 0 (6.3 x 32mm), 10 x 38mm and 20 x 5mm. Models include low profile units, panel mount, flange mount and both finger and tool removal versions.

Insulation resistance is 100Mohm at 500V DC and breakdown voltage is 1500V AC for 1min or, in the higher rated models, 3000V AC for 1min.

The majority of products in the range carry UL and CSA approval and versions with VDE approval are also available.